Do you have room that could benefit from a ceiling fan Setting up a ceiling fan is as easy as changing your current light fixture. Most of the cabling will already be available, hence the only obstacle will be replacing the existing workbox with one that is authorized for the weight of a ceiling fan. Hanging your new ceiling fan on an pre-existing box that won't support the extra weight of the fan could lead to disaster. Right before you do anything, read the guidelines for your fan very carefully and make certain you have the necessary tools.

Should you decide to have the fan on a cathedral ceiling, you must get an extension so the fan wont be so high up. Given that you are all set for the real installation, be sure that the breaker is turned off, so no power is going to the light you are replacing. After removing the current light fixture, check to see if the installed workbox can tackle the weight of your ceiling fan. In many cases, the workbox will never be able to handle the extra weight so you may need even more support. Including support to the workbox is not that tough if you have entry to the light fixture from the attic.

All you want to do, is nail a 2x4 inside the ceiling rafters, in order that it touches the top of the workbox. Be positive that the 2x4 is attached and then screw on the box to the wood. If everything is performed correctly, the weight of the fan will now be totally supported by the wood and the screws. If you do not have admittance to the attic, you will definately have to mount metal cross bracing through the hole in your ceiling. Doing this is much more of a challenge and may not be as safe as using a 2x4 but it is the best you can do if you dont have access to the attic.

After you have put together the fan correctly, you are now ready to hang your fan. The issue is to keep the fan while attaching the wiring. The challenge is based on the kind of fan you have, whether it is a hanging frame or a fan that has a bracket with a J hook. The majority of fans, you will see a wall mount switch with a chain to control the speed of the fan. If you also set up a light kit with the fan, both can be monitored by a wall switch or chain.

The next task is to follow along with the wiring instructions which are as simple as connecting two white wires, two black wires and two ground wires. Now all you need to do is complete assembling the fan according to the guidelines, by attaching the fan blades free woodworking plans. Once this is all done, it is time to turn the breaker back on to see if it works.